Refer a Friend and Earn $10!

THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser
THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser

THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser

Regular price
$225.00
Sale price
$120.00
Unit price
per 
TAX INCLUDED IN PRICE
We have 1 in stock.
ITEM NUMBER: F001C

LED STRIPS NOT INCLUDED

THMOOTHER V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser, 10-Pack 16x16MM Anodized Silver Track with Curved Milky Cover, Corner Connector And Mounting System

Why need a channel with diffuser ?
1.Protect the exposed strip from Dust,Moisture and inadvertent touch,extend the lifespan of the strip
2. Provide a New Professional Clean finish to the exposed fixtures,Take your LED strips to the next level
3. breake up the harshness dots from the led strip without making light too dim, evening out the lights to a fairly smooth glow.

Steps for a DIY Lighting Project
1.Measure the width of the strip ( make sure it is not oversized in the channel ) and test it
2.Trim the channel and cover to a required length by hacksaw or other devices .
3.Peel off the sticky at the back of the strip ,lay the strip in the channel
4.Snap the diffuser into the slot of the V channel ,fix the end caps if needed
5.Screw the Mounting Clips into the working surface (Make sure the Pilot hole is in a straight Line ), Clamp the channel in the clips
6.Flush channel end to end and fix clips in the middle of the channel for extension
7.Wiring
The Strip Can be assembled after mounting the channel or away from the working site

Packing details
1.6.56FT/200CM V Shape Aluminum Channel -10 pieces
2.6.56FT/100CM Milky Cover -10 Pieces
3.304 Stainless Steel Countersunk Screw -40 Pieces
4.End Cap With Hole -20 Pieces
5.End Cap Without Hole-20 Pieces
6.Stainless steel Mounting Clips-40 Pieces
7.90 Degree Corner Connector X4

Colour Silver
Brand THMOOTHER
Indoor/Outdoor usage Outdoor
Light source type LED
Power source Corded Electric
Material Aluminum
Controller type Remote Control
Number of light sources 10
Wattage 72 watts
Item weight 2.47 Kilograms
Matte Cover is Easy Snapped Into the Extruded Rail, It Does Not Only Protect The Exposed Strip From Dust And Moisture But Also Evening And Smooth Out The Harsh Light From Strip Without Color Shift, 90% Transmittance Rate

The Channel Can Be Trimmed To Required Length Easily By Hacksaw Or Grinder,The Cover Can Be Cut By Utility Knives And Scissors,The Lens is protected by Film Initially 

The Aluminum Profile Is Designed To Hold The Strip Less Than 12.1mm(0.48’) Wide ,It Fit For A Majority Of 5050 5630 2835 Steady color ,RGB RGBW Tape(not for Hue 2ND)

Stainless/Carbon Steel Screw and Mounting Kit,Anti Rust in Humid environment like kitchen Cabinet or Outdoor eave , 4 Pieces Of 90 Degree Corner Connector Makes Turning More Professional